About REVOE Clip
Bill Cobb established Revoe Manufacturing Ltd in order to pursue his idea of an attachment clip to stop the damage to the face of T-Bar Ceiling Grid. He designed and patented the series of Revoe Clips. Architects and Building Owners, had been telling the Interior Systems Trade contractors that they no longer wanted the top track of partition wall attached to the face of the ceiling grid with screws or "two sided tape". The latter pulling the face of the grid off when the partitions were demolished or relocated. The screws left holes which had to be repaired and in some cases the complete grid had to be replaced.
The Revoe clips are the only clips that are not placed inside the cavity wall or attached to the face of the grid or wall trim. Thereby no need to break into the wall to detach the clip from the grid. The clips can be detached by removing a portion of the ceiling tiles and the clip can be detached. The partitions can then either be relocated or removed with minimal demolition and dust in the air. The wall can be cut into large pieces and removed.
We have four types of the Revoe Clip. Each one has a specific job. If you view the Products Page it can be determine which clips you require.
